Incorporate CO Detectors Into Your Security System

Putting carbon monoxide detectors in your home is a great beginning, but you may elevate your defense even more by integrating them into your home’s security. By doing so, you’ll enjoy an added form of protection, as your monitoring specialists will be updated whenever a CO detector is tripped. This backup can prove to be critical, specially if an emergency takes place in the early morning hours and you aren’t roused by the alarm.

Order CO Detectors In Naperville With Your Security System

Safeguard your family against all sorts of risks with a full-featured home security system from Secure24 Alarm Systems. Our CO and fire alarms in Naperville are professionally monitored in the same fashion as your other security sensors. You’ll have backup from an attentive, 24-7 team any time a crises occurs. Dial (630) 360-2986 today to improve the security of your loved ones and home.

Homeowners must protect against various risks like fire, flooding, and burglary. But what about a danger that you aren’t able to see or smell? Carbon monoxide creates an uncommon challenge because you may never be aware that it’s there. Despite that, installing CO detectors can effectively protect your family and property. Explore more about this potentially lethal gas and where to place carbon monoxide detectors in your Naperville residence.

What Is Carbon Monoxide?

Known as the silent killer due to its lack of color, odor, or taste, carbon monoxide is a readily found gas caused by the incomplete combustion of fuels. Any appliance that consumes fuels like a fireplace or furnace can produce carbon monoxide. Even though you normally won’t have problems, difficulties can arise when equipment is not routinely maintained or adequately vented. These missteps can lead to a proliferation of this potentially deadly gas in your residence. Generators and heaters of various types are commonly to blame for CO poisoning.

When subjected to lower levels of CO, you may suffer from headaches, dizziness, fatigue nausea, or vomiting. Prolonged exposure to elevated levels can cause cardiopulmonary arrest, and even death.

Suggestions On Where To Place Naperville Carbon Monoxide Detectors

If your home lacks a carbon monoxide detector, get one now. Ideally, you ought to install one on every floor, including basements. Browse these suggestions on where to place carbon monoxide detectors in Naperville:

• Put them on each floor, particularly in places where you have fuel-burning appliances, including furnaces, gas dryers, fireplaces, and water heaters.
• Always use one no more than 10 feet away from sleeping areas. If you only get one carbon monoxide detector, this is where it should go.
• Place them about 10 to 20 feet from potential CO producing appliances.
• Do not affix them right next to or above fuel-burning appliances, as a bit of carbon monoxide may be emitted when they turn on and trigger a false alarm.
• Attach them to walls approximately five feet from the ground so they will test air where people are breathing it.
• Avoid putting them near doors or windows and in dead-air areas.
• Place one in areas above attached garages.

Test your CO detectors routinely and maintain them according to manufacturer recommendations. You will typically need to replace them in six years or less. You should also make sure any fuel-burning appliances are in in proper working order and have proper ventilation.