How To Reset Your Security System In Naperville

One perk of getting your home security system set up by trained experts is that you seldom find a reason to worry about it. With that being said, there could be a couple situations when you must reset your alarms in Naperville. When using the ADT Command panel, your system reset usually requires just one or two button tap when you’ve experienced occurrences like battery changes, power outages, and false alarms.

Consult Your Owner’s Manual Before Attempting An Alarm Reset

Here’s a simple yet valuable tip before you start resetting your Naperville home security system, consult your manual first. You wouldn’t want to undermine your system as a result of touching something incorrectly. In addition, the process may change if you switched from a number pad to a fully digital system. If there’s ever a time when you can't reset your system, don't hesitate to reach out to the professionals.

Resetting Your Naperville Security System After A False Alarm

Generally, a false alarm takes place as a result of an accidentally tripped sensor. You can engage the control panel or bring up the ADT mobile app and hit the shield icon and enter your unique passcode to turn off the system for these instances. You might be contacted by your 24-hour monitoring specialists, but just tell them you had a false alarm.

Resetting Your Alarm Following A Power Outage In Naperville

If the power goes out due to lighting, strong winds, or other reasons, you might start to hear a beeping sound from your control panel. This signifies that your security is running off the battery backup. To reset the alarm and halt the steady beeps, you need to take steps to disarm and rearm your security.

However, if your power outage lasts for prolonged time frame, you might need a total system reset. Pay careful attention to the instructions in the manual -- normally by submitting your PIN number and hitting the off button two times -- and you should be back to normal. You may keep hearing chirping caused by the secondary power source, as it may not end until your battery reaches a full charge. Contact your security technician if you are still having problems with your ADT system 20 hours after the power is resumed.

How To Reset Your Home Security System After Replacing A Battery

There will be infrequent times when you will have to replace a battery powering one of your home security components. In order to accomplish this, you should change your alarm system to "Test Mode" so you prevent setting off a false alarm. After the you replace the old battery, remove the alarm out of "Test Mode" and resume normal operations. If the system fails to notice the device or the battery indicator remains on, you could require a total reset of the system.

Resetting Your Naperville Security System Following The Addition Or Deletion Of A User

Adding and deleting users can be done on your ADT Command hub and your ADT mobile app. You won’t require a system reset after adding or removing a user or code. With that being said, if you relocate to a new property with an existing ADT alarm system, you'll want to reach out to your security specialists at (630) 360-2986 to start a new contract. The technician will visit your property to replace outdated parts, place additional alarms or cameras (if necessary), and reset the system for you.

A Well-Designed Security System Is The Right Choice

Figuring out how to reset a home security system in Naperville will likely be difficult if it fails to include understandable devices and controls. If the time has come to get your easy-to-use home protection system, call (630) 360-2986 or complete the form below. We’ll be pleased to design the ideal security system for your property.